PlasTech Plus Physical Test & Condictions: Polypropylene
PlastiCell compared to Calcium Carbonate
| PROPERTY | UNITS | ATOMITE (CALC. CARB.) |
PLASTECH PLASTICELL |
|||
 |
||||||
| FILL PERCENT |
% | 40% | 40% | |||
| ASH |
% | 38.5% | 2.4% | |||
| SPECIFIC GRAVITY |
---- | 1.23 | 1.05 | |||
| TENSILE STRENGTH |
MPa | 20.3 | 31.6 | |||
| FLEXURAL MODULUS |
MPa | 3728 | 4599 | |||
| FLEXURAL STRENGTH |
MPa | 54.7 | 56.2 | |||
| HEAT DISTORTION TEMPERATURE @ 66 PSI |
ºC | 115 | 143 | |||
| HEAT DISTORTION TEMPERATURE @ 264 PSI |
ºC |
63 | 95 | |||
| NOTCHED IZOD |
fpin | 0.54 | .41 | |||
| MOLD SHRINK |
% | 0.9 | 0.4 | |||
| MOISTURE |
% | 0.0 | .38 | |||
| SCRATCH |
FORD 7mm | 1-3 | 2-3 | |||
Copyright © 2005 PlasTech Plus Co. All rights reserved.
Send comments and suggestions to plastechplus@yahoo.com
Web site design by Standing Stone Designs.